Painting the interior walls is one of the easiest and most rewarding things to do. For those who are a bit experienced in this field this is like a relaxation method for them. By painting you can completely transform your interior, giving it a whole new look. Using a roller and brush is very simple, and the ideas are all around you. If you want the painting not to turn into a stressful situation, listen to the advice of Canada Colors & Chemicals, roll up your sleeves and start.
The larger the sample the better the sample
Do not expect that the sample size of fingernail will help you visualize how a particular color looks great on your wall. It would be best to use a larger pattern that is at least 0.25 square meters.
Will it pay off if you invest in a quality color? Of course. Cheaper colors look good while it is still wet, but not when dry. Once they dry they will look cheap. Also, new paint dries quickly, some even after 30 minutes, so you won’t have to wait for the other day.
How much paint you need
Before you go shopping, take meter in your hands. To calculate how much paint, you need you should use the following formula. For the surface of the walls: Multiply the length and height of the longest wall and all that multiply by four. Double, if you want to coat the walls twice. Do not forget the ceiling. The standard rule of thumb is about four liters of paint and it covers 37 square meters of the wall.
First of all before you begin put a thick nylon everywhere on your floors. The new colors are more stable and hard to remove so make sure you protect the floors because they will not be able to clean myself. Before painting you need to clean the walls, especially in the kitchen, where there are stains from grease and food. If you do not clean the stain, the color will not be applied properly.
Make sure you clean the walls with water before you start painting. That will remove all the grease that is left. If you do not remove it the paint won’t fit. Use soft clothes to wipe the walls and dry them from the water.
Start with the corners
Experienced painters start by painting the corners and the edges first, and then they continue painting the rest of the walls, slowly making sure they do not miss a spot. The effects are amazing.
Never dip the roller into the paint to handle the color would strainers. If you are not able to on the first day the job done, seal the drums, and tomorrow strain struggle and continue to paint over, otherwise the walls may appear blobs of paint and ruin all your hard work.